Mirko Lelansky
2015-04-27 20:34:38 UTC
Dear Sir or Madam,
I am using the TinyOS to programming the firmware of a Shimmer-sensor
version 2.
I want to use the Accelerometer and the ECG with one senser and analyse
the receive data.
The configuration of this isn't a problem a successfully configured the
shimmerAnalogSetup interface, the timer to call the
shimmerAnalogSetup.triggerConversion command, which fire the event
DMA0.transferDone, when new data are available so that i can call
DMA0.repeatTransfer to store the new data. This setup based on the
SimpleAccel example under
https://github.com/ShimmerResearch/tinyos-shimmer or under
tinyos-2.x-contrib.
My problem is that when I receive a new value I have no information, if
the new value are received by the Accelerometer or by the ECG. If there
are any way to get the information, because I want to make different
analyses on the values , this is why I need the information.
Yours faithfully
Mirko Lelansky
I am using the TinyOS to programming the firmware of a Shimmer-sensor
version 2.
I want to use the Accelerometer and the ECG with one senser and analyse
the receive data.
The configuration of this isn't a problem a successfully configured the
shimmerAnalogSetup interface, the timer to call the
shimmerAnalogSetup.triggerConversion command, which fire the event
DMA0.transferDone, when new data are available so that i can call
DMA0.repeatTransfer to store the new data. This setup based on the
SimpleAccel example under
https://github.com/ShimmerResearch/tinyos-shimmer or under
tinyos-2.x-contrib.
My problem is that when I receive a new value I have no information, if
the new value are received by the Accelerometer or by the ECG. If there
are any way to get the information, because I want to make different
analyses on the values , this is why I need the information.
Yours faithfully
Mirko Lelansky