steve ayer
2013-02-28 14:38:46 UTC
hi yared,
i suggest that you contact the person who wrote blip to check its
current status and his future plans for this 6lowpan stack. his name is
at the top of the test-app's readme, and you should be able to find
current contact info via the miracle of the information superhighway.
fwiw, the last time that i played around with blip (last fall) i was
unable to make it work as advertised, and my attention was diverted by
real tasks before sorting out the source of the problem.
bottom line is that tinyos should not have code in the tree, especially
library support stuff under "sdk," that doesn't even compile. eric, you
might want to ping steve about this?
good luck,
steve
i suggest that you contact the person who wrote blip to check its
current status and his future plans for this 6lowpan stack. his name is
at the top of the test-app's readme, and you should be able to find
current contact info via the miracle of the information superhighway.
fwiw, the last time that i played around with blip (last fall) i was
unable to make it work as advertised, and my attention was diverted by
real tasks before sorting out the source of the problem.
bottom line is that tinyos should not have code in the tree, especially
library support stuff under "sdk," that doesn't even compile. eric, you
might want to ping steve about this?
good luck,
steve
Send Shimmer-users mailing list submissions to
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
or, via email, send a message with subject or body 'help' to
You can reach the person managing the list at
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Shimmer-users digest..."
1. Re: Shimmer blip compilation error (Yared Berhanu)
2. Re: Shimmer blip compilation error (Eric Decker)
----------------------------------------------------------------------
Message: 1
Date: Thu, 28 Feb 2013 08:50:08 +0100
Subject: Re: [Shimmer-users] Shimmer blip compilation error
Content-Type: text/plain; charset="iso-8859-1"
Dear Eric,
Thank you for your prompt response. Does that mean I can't use Blip 2.0 on
Shimmer2r right now? The reason am asking you is that I have to decide now
since I am doing my Thesis which limited time. Unless I decide now, it
would be hard for me to switch in the middle. Please advise me on this.
Sincerely,
current release from https://github.com/tinyos/tinyos-release and the
development tree from https://github.com/tinyos/tinyos-main.
Blip 2.0 has been added to the trunk. But changes were made prior to the
2.1.2 release that removed support/sdk/c/blip/lib6lowpan/devconf.h
And the developer seems to be no longer active.
I'm not sure what to tell you.
I've CC'd others to see if they might no of anything.
Eric B. Decker
Senior (over 50 :-) Researcher
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
or, via email, send a message with subject or body 'help' to
You can reach the person managing the list at
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Shimmer-users digest..."
1. Re: Shimmer blip compilation error (Yared Berhanu)
2. Re: Shimmer blip compilation error (Eric Decker)
----------------------------------------------------------------------
Message: 1
Date: Thu, 28 Feb 2013 08:50:08 +0100
Subject: Re: [Shimmer-users] Shimmer blip compilation error
Content-Type: text/plain; charset="iso-8859-1"
Dear Eric,
Thank you for your prompt response. Does that mean I can't use Blip 2.0 on
Shimmer2r right now? The reason am asking you is that I have to decide now
since I am doing my Thesis which limited time. Unless I decide now, it
would be hard for me to switch in the middle. Please advise me on this.
Sincerely,
Greetings all,
I am new member and it my first time to post on this mailing list. My
problem is, I want to install blip on shimmer2r devices and I have
downloaded the recent tinyos-main and tinyos-2.x-contrib OS using svn from
goodlecode repo.
The SVN repository at Google has been Deprecated. You want to get theI am new member and it my first time to post on this mailing list. My
problem is, I want to install blip on shimmer2r devices and I have
downloaded the recent tinyos-main and tinyos-2.x-contrib OS using svn from
goodlecode repo.
current release from https://github.com/tinyos/tinyos-release and the
development tree from https://github.com/tinyos/tinyos-main.
Blip 2.0 has been added to the trunk. But changes were made prior to the
2.1.2 release that removed support/sdk/c/blip/lib6lowpan/devconf.h
And the developer seems to be no longer active.
I'm not sure what to tell you.
I've CC'd others to see if they might no of anything.
I have followed all the steps on the tinyos wiki for installation but I
could go through it, here were the command I used to compile and the error
I found
make shimmer2r blip install bsl,/dev/ttyUSB0
mkdir -p build/shimmer2r
compiling BaseStationC to a shimmer2r binary
ncc -o build/shimmer2r/main.exe -Os -O -DCC2420_HW_ACKNOWLEDGEMENTS
-DCC2420_HW_ACKNOWLEDGEMENTS -DCC2420_HW_ADDRESS_RECOGNITION -DPACKET_LINK
-DTOSH_DATA_LENGTH=125 -I/home/tiny2/tinyos-main/tos/lib/net/
-I/home/tiny2/tinyos-main/tos/lib/printf/
-I/home/tiny2/tinyos-main/support/sdk/c/blip/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/interfaces/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/nwprog/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/shell/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/serial/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/platform/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/icmp/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/dhcp/
/home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/iovec.c
/home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/in_cksum.c
/home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/ip_malloc.c
/home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/utility.c
/home/tiny2/tinyos-main/tos/lib/net/blip/table.c -mdisable-hwmul
-fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=shimmer2r
-fnesc-cfile=build/shimmer2r/app.c -board= -DDEFINED_TOS_AM_GROUP=0x22
-DCC2420_DEF_CHANNEL=15 -DPACKET_LINK
-I/home/tiny2/tinyos-main/support/sdk/c/blip/interface
-I/home/tiny2/tinyos-main/tos/lib/serial -DIDENT_APPNAME=\"BaseStationC\"
-DIDENT_USERNAME=\"tiny2\" -DIDENT_HOSTNAME=\"tiny1\"
-DIDENT_USERHASH=0x543ca1f9L -DIDENT_TIMESTAMP=0x512e41afL
-DIDENT_UIDHASH=0x8d39b1c1L BaseStationC.nc -lm
BaseStationC.nc:88:21: error: devconf.h: No such file or directory
BaseStationP.nc:72:21: error: devconf.h: No such file or directory
BaseStationP.nc:192: `config_reply_t' undeclared (first use in this
function)
BaseStationP.nc:192: (Each undeclared identifier is reported only once
BaseStationP.nc:192: for each function it appears in.)
BaseStationP.nc:192: `reply' undeclared (first use in this function)
BaseStationP.nc:199: syntax error before `)'
BaseStationP.nc:202: `CONFIG_ERROR_BOOTED' undeclared (first use in this
function)
BaseStationP.nc:375: `config_cmd_t' undeclared (first use in this
function)
BaseStationP.nc:386: `config_cmd_t' undeclared (first use in this
function)
BaseStationP.nc:386: `cmd' undeclared (first use in this function)
BaseStationP.nc:387: syntax error before `error'
BaseStationP.nc:388: `config_reply_t' undeclared (first use in this
function)
BaseStationP.nc:388: `reply' undeclared (first use in this function)
BaseStationP.nc:388: syntax error before `)'
BaseStationP.nc:390: syntax error before `)'
BaseStationP.nc:393: `CONFIG_ECHO' undeclared (first use in this function)
BaseStationP.nc:393: case label does not reduce to an integer constant
BaseStationP.nc:395: `CONFIG_SET_PARM' undeclared (first use in this
function)
BaseStationP.nc:395: case label does not reduce to an integer constant
BaseStationP.nc:406: `CONFIG_REBOOT' undeclared (first use in this
function)
BaseStationP.nc:406: case label does not reduce to an integer constant
BaseStationP.nc:409: `CONFIG_KEEPALIVE' undeclared (first use in this
function)
BaseStationP.nc:409: case label does not reduce to an integer constant
BaseStationP.nc:413: `error' undeclared (first use in this function)
BaseStationP.nc:424: `config_reply_t' undeclared (first use in this
function)
BaseStationP.nc:424: `reply' undeclared (first use in this function)
BaseStationP.nc:427: syntax error before `)'
BaseStationP.nc:453: `config_reply_t' undeclared (first use in this
function)
#warning "*** LOW POWER COMMUNICATIONS DISABLED ***"
warning: #warning "*** USING PACKET LINK LAYER"
Reset.h:56:2: error: #error "Reset.h not defined/supported for your
platform, aborting..."
make: *** [exe0] Error 1
Could you help me please,
Sincerely,
--
Yared Berhanu Woldegiorgis
?kern torgvei 92
N-0589 Oslo, Norway
tel. 004746263024
_______________________________________________
Shimmer-users mailing list
https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
--could go through it, here were the command I used to compile and the error
I found
make shimmer2r blip install bsl,/dev/ttyUSB0
mkdir -p build/shimmer2r
compiling BaseStationC to a shimmer2r binary
ncc -o build/shimmer2r/main.exe -Os -O -DCC2420_HW_ACKNOWLEDGEMENTS
-DCC2420_HW_ACKNOWLEDGEMENTS -DCC2420_HW_ADDRESS_RECOGNITION -DPACKET_LINK
-DTOSH_DATA_LENGTH=125 -I/home/tiny2/tinyos-main/tos/lib/net/
-I/home/tiny2/tinyos-main/tos/lib/printf/
-I/home/tiny2/tinyos-main/support/sdk/c/blip/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/interfaces/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/nwprog/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/shell/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/serial/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/platform/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/icmp/
-I/home/tiny2/tinyos-main/tos/lib/net/blip/dhcp/
/home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/iovec.c
/home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/in_cksum.c
/home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/ip_malloc.c
/home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/utility.c
/home/tiny2/tinyos-main/tos/lib/net/blip/table.c -mdisable-hwmul
-fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=shimmer2r
-fnesc-cfile=build/shimmer2r/app.c -board= -DDEFINED_TOS_AM_GROUP=0x22
-DCC2420_DEF_CHANNEL=15 -DPACKET_LINK
-I/home/tiny2/tinyos-main/support/sdk/c/blip/interface
-I/home/tiny2/tinyos-main/tos/lib/serial -DIDENT_APPNAME=\"BaseStationC\"
-DIDENT_USERNAME=\"tiny2\" -DIDENT_HOSTNAME=\"tiny1\"
-DIDENT_USERHASH=0x543ca1f9L -DIDENT_TIMESTAMP=0x512e41afL
-DIDENT_UIDHASH=0x8d39b1c1L BaseStationC.nc -lm
BaseStationC.nc:88:21: error: devconf.h: No such file or directory
BaseStationP.nc:72:21: error: devconf.h: No such file or directory
BaseStationP.nc:192: `config_reply_t' undeclared (first use in this
function)
BaseStationP.nc:192: (Each undeclared identifier is reported only once
BaseStationP.nc:192: for each function it appears in.)
BaseStationP.nc:192: `reply' undeclared (first use in this function)
BaseStationP.nc:199: syntax error before `)'
BaseStationP.nc:202: `CONFIG_ERROR_BOOTED' undeclared (first use in this
function)
BaseStationP.nc:375: `config_cmd_t' undeclared (first use in this
function)
BaseStationP.nc:386: `config_cmd_t' undeclared (first use in this
function)
BaseStationP.nc:386: `cmd' undeclared (first use in this function)
BaseStationP.nc:387: syntax error before `error'
BaseStationP.nc:388: `config_reply_t' undeclared (first use in this
function)
BaseStationP.nc:388: `reply' undeclared (first use in this function)
BaseStationP.nc:388: syntax error before `)'
BaseStationP.nc:390: syntax error before `)'
BaseStationP.nc:393: `CONFIG_ECHO' undeclared (first use in this function)
BaseStationP.nc:393: case label does not reduce to an integer constant
BaseStationP.nc:395: `CONFIG_SET_PARM' undeclared (first use in this
function)
BaseStationP.nc:395: case label does not reduce to an integer constant
BaseStationP.nc:406: `CONFIG_REBOOT' undeclared (first use in this
function)
BaseStationP.nc:406: case label does not reduce to an integer constant
BaseStationP.nc:409: `CONFIG_KEEPALIVE' undeclared (first use in this
function)
BaseStationP.nc:409: case label does not reduce to an integer constant
BaseStationP.nc:413: `error' undeclared (first use in this function)
BaseStationP.nc:424: `config_reply_t' undeclared (first use in this
function)
BaseStationP.nc:424: `reply' undeclared (first use in this function)
BaseStationP.nc:427: syntax error before `)'
BaseStationP.nc:453: `config_reply_t' undeclared (first use in this
function)
#warning "*** LOW POWER COMMUNICATIONS DISABLED ***"
warning: #warning "*** USING PACKET LINK LAYER"
Reset.h:56:2: error: #error "Reset.h not defined/supported for your
platform, aborting..."
make: *** [exe0] Error 1
Could you help me please,
Sincerely,
--
Yared Berhanu Woldegiorgis
?kern torgvei 92
N-0589 Oslo, Norway
tel. 004746263024
_______________________________________________
Shimmer-users mailing list
https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
Eric B. Decker
Senior (over 50 :-) Researcher